Total number of cooktop burners
Dimensions of the heating elements
1 x (38,0 x 24,0 cm)
Basic surface material
93 x 380 x 520 mm
Minimum height for installation
Maximum height for installation (in.)
Minimum width for installation
Maximum width for installation
Depth for installation
Appliance height above the worktop
Previous Next Previous Next
Cooktop-based hood control
Residual heat indicator
pan recognition, Power management function, Safety time-switch-off
Power cord length
no plug Cooking zones
2 flex induction cooking areas. Small area: 7 1/2" x 9" (2200 W, with booster 3700 W), Large area: 15" x 9" (3300 W, with booster 3700 W). Operation
Control knobs with illuminated
ring, cooking zone and output level markings.
Electronic power control in 17 output levels.
User friendly control with bi-coloured display (white / orange). Features
Flex function for rectangular cooking areas.
Frying sensor function.
Cooktop-based ventilation control (with suitable hood).
Home network integration for digital services (Home Connect) wireless via WiFi.
The use of the Home Connect functionality depends on the Home Connect services, which are not available in every country. For further information please check: home-connect.com. Safety
Digital 2 stage residual heat indicator
Safety shut-off. Planning notes
Depending on the type of installation - surface- or flush-mounted, with or without cover - the specific location of the cut-out and the control knob positions may vary.
The horizontal positioning of the knobs may be aligned with the specific cooking areas.
The adjacent drawing "Installation of the control knob" must be observed if the panel is more than 1" thick. There must be a recess at the rear for proper electronic knob installation.
If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided.
The bearing capacity and stability,
in the case of thin countertops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads.
Additional instructions for flush mounting:
Flush installation is possible in countertops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the edges must be observed. For other materials, please consult with your countertop manufacturer.
The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining.
The joint width may vary due to size tolerances of the combinations and of the countertop cut-out.
If installing several appliances in individual cut-outs allow for a division bar of inimum 1 " (50 mm) between the individual cut-outs.
Operates with magnetic (induction)
iron pots and pans only. For an optimal heat distribution, the use of flat bottom cookware is recommended.
Appliance can be snapped into the countertop from above.
Appliance weight: approx. 12 kg. Rating
Total rating: Connected load: 3120 W
Plan for a 59 1/16"connecting cable
without plug (hardwire required).
Please check the user manual for how to switch off the WiFi module.
Total Amps: 15 A.
208 - 240 V / 60 Hz.
Show All Technical Information